SEND US YOUR SAMPLE, OR CONTACT US FOR PRICING TO COLLECT IT FOR YOU!

Soil Sample Collection

For testing soil corrosivity, it's crucial to collect the soil sample at the depth where the infrastructure will be installed, as this is where the material will be exposed to potential corrosion. The process is similar to general soil sampling, but with an emphasis on reaching the target depth accurately and avoiding contamination that could skew the corrosivity results. Typically, this depth will depend on the type of infrastructure being installed, such as pipelines, cables, or foundations. Additionally, you will need a minimum of 150 grams of soil to ensure accurate testing.

When collecting your sample:

  1. Target the Installation Depth: Collect the soil sample from the specific depth where the infrastructure will be placed, whether that's a few feet below the surface or deeper. Use appropriate tools that can reach this depth, such as augers or drilling rigs for deeper layers. The depth is important because soil chemistry changes greatly with depth and location, impacting the corrosivity of the soil. Ensure the sample comes from the correct depth without contamination from the strata above.

  2. Ensure Minimal Disturbance: Since soil at different depths can vary in composition and moisture, it's important to avoid mixing soil from different layers. Once you reach the desired depth, carefully remove only that layer of soil and store it separately to maintain its integrity for testing. This prevents contamination that could result in inaccurate readings.

  3. Seal and Label Properly: Corrosivity testing can be affected by changes in moisture and chemical exposure. Once collected, seal the sample in a moisture-resistant container and label it with the exact depth and location details. Keep the sample cool and dry if possible to prevent any changes in its natural state before testing. Ensure that at least 150 grams of soil is collected to provide enough material for comprehensive corrosivity analysis.

By focusing on these depth-specific techniques and ensuring enough soil is collected, you'll obtain more accurate data about the corrosivity of the soil where your infrastructure will be installed.